Catalyst

Notes on Catalyst, an MVC web framework for perl.

Installation

Other people's instructions

• Getting this to work on Dreamhost

On Dreamhost with perlbrew

Here, I am using perlbrew instead of the typical instructions, and hope to bypass the whole local::lib thing.

Presume that myperl is a perlbrew environment that's already been set up and that its executable is at

/home/someuser/perl5/perlbrew/perls/myperl/bin/perl

Install modules with cpanm:

perlbrew use myperl
cpanm Catalyst::Runtime Catalyst::Devel Catalyst::TraitFor::Request::ProxyBase

Version check

Run the following, which always fails:

perl -M"Catalyst 999"

If the failure is about a version number, the install worked (and the error displays the version number). Otherwise, there was a problem.

Link catalyst.pl

Instructions and tutorials refer to the bootstrap script catalyst.pl. This is installed in the bin dir of the perlbrew environment:

/home/someuser/perl5/perlbrew/perls/myperl/bin/catalyst.pl

To make this less of a mouthful, make this accessible from your path. In this example, I'll qualify it with the name of the perlbrew env in case I want to set this up for multiple sites; anytime the doc says "catalyst.pl" I'll substitute "myperl-catalyst.pl".

ln -s /home/someuser/perl5/perlbrew/perls/myperl/bin/catalyst.pl ~/bin/myperl-catalyst.pl

Test on a site

Here, sub.example.com is a domain that has been set up with FastCGI enabled.

Save the following script, modify the variables SITENAME, CATALYST, PERLENV, and PARENT as necessary, and run. This script will:

• Go to the root specified by $PARENT
• Create a new, empty site named $SITENAME at $PARENT/$SITENAME
• Create and chmod $PARENT/$SITENAME/script/dispatch.fcgi to automatically run the generated FastCGI script
  • The reason for this naming is discussed in the Dreamhost wiki.
  • This part is skipped if catalyst.pl has not generated the expected *_fastcgi.pl file.
• Replace all instances of "/usr/bin/env perl" with the path of the specified perlbrew perl
• Run perl Makefile.PL, as suggested by catalyst.pl to "make sure your install is complete"

#!/bin/bash

# Load perlbrew env
source ~/perl5/perlbrew/etc/bashrc

SITENAME=Foo
CATALYST=catalyst.pl
PERLENV=myperl
PARENT=~/sub.example.com

myperl="`perlbrew use "$PERLENV" && which perl`"

perlbrew use "$PERLENV" &&
cd "$PARENT" &&
"$CATALYST" "$SITENAME" &&
cd "$SITENAME" &&
(
    cd script &&
    for fcs in *_fastcgi.pl; do
        cat > dispatch.fcgi <<EOF &&
#!/usr/bin/env perl
do '$fcs';
EOF
        chmod 755 dispatch.fcgi
    done
) &&
# This part corrects all the "/usr/bin/env perl" shebangs with the perlbrew perl
find -type f -exec perl -p -i -e "s!/usr/bin/env perl!$myperl!g" {} \; &&
# "make sure your install is complete"
perl Makefile.PL

After this, visiting the page

http://sub.example.com/Foo/script/dispatch.fcgi/

(note the trailing slash) results in a default welcome screen. (If the result is a 500, something wasn't set up correctly.)

Well-hidden dispatch

With the following methodology, it is possible to:

• Store the project separately from the document root, preventing access to material in the event of a misconfiguration.
• Prevent, with caveats, the dispatch script from being requested directly by a client.

Pre-flight

• Ensure FastCGI is enabled on the domain.
• Ensure that dash, or some other minimalist/low-overhead shell, is installed.
  • We will use a wrapper script rather than a symlink to run the project dispatch script. This way, the script is able to locate itself correctly.
• Ensure the CPAN module Catalyst::TraitFor::Request::ProxyBase is installed.
  • This module is used here to alter the base URI so that requests to the dispatch script cannot be made directly by the client.

Locations

These variables are assumed set:

# The full path to dash (or your choice of minimal sh)
export DASH="$HOME/bin/dash"
# The name of the perlbrew env to use
export MYPERLENV=myperl
# The full path to the domain document root
export DOCUMENT_ROOT="$HOME/sub.example.com"
# The name of the Catalyst project
export PROJECT_NAME=Foo
# The root dir of the Catalyst project
export PROJECT_ROOT="$HOME/catalyst-projects/$PROJECT_NAME"

# The full path to main perl module for the Catalyst project
export PROJECT_MAIN_MODULE="$PROJECT_ROOT/lib/$PROJECT_NAME.pm"
# The full path to the FastCGI script for the Catalyst project
export PROJECT_FASTCGI_SCRIPT="`find "$PROJECT_ROOT/script/" -name '*_fastcgi.pl'`"

# The full path to the perl that should be used
export MYPERL="`perlbrew use "$MYPERLENV" && which perl`"

Main project module

$PROJECT_MAIN_MODULE must be updated to apply the base-altering trait. Do this in one of two ways:

Change automatically

If the format of the generated module hasn't changed much, you can just run this patch (which is based on diff -U1):

patch "$PROJECT_MAIN_MODULE" <<'EOF'
@@ -24,2 +24,4 @@
 
+use CatalystX::RoleApplicator;
+
 extends 'Catalyst';
@@ -44,2 +46,7 @@
 
+# Apply additional roles to the request class
+__PACKAGE__->apply_request_class_roles(qw/
+       Catalyst::TraitFor::Request::ProxyBase
+/);
+
 # Start the application
EOF

Change manually

If you can't run the patch as above, you can still simply edit $PROJECT_MAIN_MODULE, making these additions:

# Insert before the line: extends 'Catalyst';

use CatalystX::RoleApplicator;

# Insert before the line: __PACKAGE__->setup();

# Apply additional roles to the request class
__PACKAGE__->apply_request_class_roles(qw/
	Catalyst::TraitFor::Request::ProxyBase
/);

Set the perl path to be used by the scripts

If applicable, update the scripts in the project to use the perlbrew perl instead of what env says:

find "$PROJECT_ROOT" -type f -exec perl -p -i -e "s#/usr/bin/env perl#$MYPERL#g" {} \;

Set up document root

(
# Set conservative permissions
umask 0077

# dispatch.fcgi
cat >"$DOCUMENT_ROOT/dispatch.fcgi" <<EOF
#!$DASH
"$PROJECT_FASTCGI_SCRIPT" "\$@"
EOF

# .htaccess
cat >"$DOCUMENT_ROOT/.htaccess" <<EOF

RewriteEngine on

# Set X-Request-Base to the URI root found in SCRIPT_URI.
SetEnvIf SCRIPT_URI ^([^/]+//[^/]+) fixed_request_base=$1/
RequestHeader set X-Request-Base %{fixed_request_base}e env=fixed_request_base

RewriteCond %{ENV:REDIRECT_STATUS} ^$
RewriteRule ^(.*)$ dispatch.fcgi/$1

EOF

# Set actual permissions
chmod 755 "$DOCUMENT_ROOT/dispatch.fcgi"
chmod 644 "$DOCUMENT_ROOT/.htaccess"
)