Catalyst

From HalfgeekKB
Revision as of 11:10, 16 January 2015 by Psmay (talk | contribs) (→‎Locations)
Jump to navigation Jump to search

Notes on Catalyst, an MVC web framework for perl.


Installation

Other people's instructions

On Dreamhost with perlbrew

Here, I am using perlbrew instead of the typical instructions, and hope to bypass the whole local::lib thing.

Presume that myperl is a perlbrew environment that's already been set up and that its executable is at 

/home/someuser/perl5/perlbrew/perls/myperl/bin/perl

Install modules with cpanm: 

perlbrew use myperl
cpanm Catalyst::Runtime Catalyst::Devel Catalyst::TraitFor::Request::ProxyBase

Version check

Run the following, which always fails: 

perl -M"Catalyst 999"

If the failure is about a version number, the install worked (and the error displays the version number). Otherwise, there was a problem.

Link catalyst.pl

Instructions and tutorials refer to the bootstrap script catalyst.pl. This is installed in the bin dir of the perlbrew environment: 

/home/someuser/perl5/perlbrew/perls/myperl/bin/catalyst.pl

To make this less of a mouthful, make this accessible from your path. In this example, I'll qualify it with the name of the perlbrew env in case I want to set this up for multiple sites; anytime the doc says "catalyst.pl" I'll substitute "myperl-catalyst.pl". 

ln -s /home/someuser/perl5/perlbrew/perls/myperl/bin/catalyst.pl ~/bin/myperl-catalyst.pl

Test on a site

Here, sub.example.com is a domain that has been set up with FastCGI enabled.

Save the following script, modify the variables SITENAME, CATALYST, PERLENV, and PARENT as necessary, and run. This script will:

  • Go to the root specified by $PARENT
  • Create a new, empty site named $SITENAME at $PARENT/$SITENAME
  • Create and chmod $PARENT/$SITENAME/script/dispatch.fcgi to automatically run the generated FastCGI script
    • The reason for this naming is discussed in the Dreamhost wiki.
    • This part is skipped if catalyst.pl has not generated the expected *_fastcgi.pl file.
  • Replace all instances of "/usr/bin/env perl" with the path of the specified perlbrew perl
  • Run perl Makefile.PL, as suggested by catalyst.pl to "make sure your install is complete"
#!/bin/bash

# Load perlbrew env
source ~/perl5/perlbrew/etc/bashrc

SITENAME=Foo
CATALYST=catalyst.pl
PERLENV=myperl
PARENT=~/sub.example.com

myperl="`perlbrew use "$PERLENV" && which perl`"

perlbrew use "$PERLENV" &&
cd "$PARENT" &&
"$CATALYST" "$SITENAME" &&
cd "$SITENAME" &&
(
    cd script &&
    for fcs in *_fastcgi.pl; do
        cat > dispatch.fcgi <<EOF &&
#!/usr/bin/env perl
do '$fcs';
EOF
        chmod 755 dispatch.fcgi
    done
) &&
# This part corrects all the "/usr/bin/env perl" shebangs with the perlbrew perl
find -type f -exec perl -p -i -e "s!/usr/bin/env perl!$myperl!g" {} \; &&
# "make sure your install is complete"
perl Makefile.PL

After this, visiting the page 

http://sub.example.com/Foo/script/dispatch.fcgi/

(note the trailing slash) results in a default welcome screen. (If the result is a 500, something wasn't set up correctly.)

Well-hidden dispatch

With the following methodology, it is possible to:

  • Store the project separately from the document root, preventing access to material in the event of a misconfiguration.
  • Prevent, with caveats, the dispatch script from being requested directly by a client.
Pre-flight
  • Ensure FastCGI is enabled on the domain.
  • Ensure that dash, or some other minimalist/low-overhead shell, is installed.
    • We will use a wrapper script rather than a symlink to run the project dispatch script. This way, the script is able to locate itself correctly.
  • Ensure the CPAN module Catalyst::TraitFor::Request::ProxyBase is installed.
    • This module is used here to alter the base URI so that requests to the dispatch script cannot be made directly by the client.
  • If no Catalyst project has been created yet, create one using catalyst.pl (in particular, the copy installed under the desired perl environment).
    • The project should be outside the document root for the domain. This walkthrough is designed such that none of the actual application server exists anyplace that might be directly accessible to a client.
Locations

These variables are assumed set. If they are set correctly, the shell snippets in the rest of this walkthrough should be runnable by pasting, without any changes. 

# The full path to dash (or your choice of minimal sh)
export DASH="$HOME/bin/dash"
# The name of the perlbrew env to use
export MYPERLENV=myperl
# The full path to the domain document root
export DOCUMENT_ROOT="$HOME/sub.example.com"
# The name of the Catalyst project
export PROJECT_NAME=Foo
# The root dir of the Catalyst project
export PROJECT_ROOT="$HOME/catalyst-projects/$PROJECT_NAME"

# The full path to main perl module for the Catalyst project
export PROJECT_MAIN_MODULE="$PROJECT_ROOT/lib/$PROJECT_NAME.pm"
# The full path to the FastCGI script for the Catalyst project
export PROJECT_FASTCGI_SCRIPT="`find "$PROJECT_ROOT/script/" -name '*_fastcgi.pl'`"

# The full path to the perl that should be used
export MYPERL="`perlbrew use "$MYPERLENV" && which perl`"
Main project module

$PROJECT_MAIN_MODULE must be updated to apply the base-altering trait. Do this in one of two ways:

Change automatically

If the format of the generated module hasn't changed much, you can just run this patch (which is based on diff -U1): 

patch "$PROJECT_MAIN_MODULE" <<'EOF'
@@ -24,2 +24,4 @@
 
+use CatalystX::RoleApplicator;
+
 extends 'Catalyst';
@@ -44,2 +46,7 @@
 
+# Apply additional roles to the request class
+__PACKAGE__->apply_request_class_roles(qw/
+       Catalyst::TraitFor::Request::ProxyBase
+/);
+
 # Start the application
EOF
Change manually

If you can't run the patch as above, you can still simply edit $PROJECT_MAIN_MODULE, making these additions: 

# Insert before the line: extends 'Catalyst';

use CatalystX::RoleApplicator;

# Insert before the line: __PACKAGE__->setup();

# Apply additional roles to the request class
__PACKAGE__->apply_request_class_roles(qw/
	Catalyst::TraitFor::Request::ProxyBase
/);
Set the perl path to be used by the scripts

If applicable, update the scripts in the project to use the perlbrew perl instead of what env says: 

find "$PROJECT_ROOT" -type f -exec perl -p -i -e "s#/usr/bin/env perl#$MYPERL#g" {} \;
Set up document root
(
# Set conservative permissions
umask 0077

# dispatch.fcgi
cat >"$DOCUMENT_ROOT/dispatch.fcgi" <<EOF
#!$DASH
"$PROJECT_FASTCGI_SCRIPT" "\$@"
EOF

# .htaccess
cat >"$DOCUMENT_ROOT/.htaccess" <<EOF

RewriteEngine on

# Set X-Request-Base to the URI root found in SCRIPT_URI.
SetEnvIf SCRIPT_URI ^([^/]+//[^/]+) fixed_request_base=$1/
RequestHeader set X-Request-Base %{fixed_request_base}e env=fixed_request_base

RewriteCond %{ENV:REDIRECT_STATUS} ^$
RewriteRule ^(.*)$ dispatch.fcgi/$1

EOF

# Set actual permissions
chmod 755 "$DOCUMENT_ROOT/dispatch.fcgi"
chmod 644 "$DOCUMENT_ROOT/.htaccess"
)
Retrieved from "https://halfgeek.org/wiki/index.php?title=Catalyst&oldid=2246"